OTHER  SERIES
其他系列
——
Cold extrusion supplement
Acid mist inhibitor
Steel pipe lubricant LUB-122
Lubricant LUB-112
Normal temperature blackening agent
Cold extrusion supplement
Acid mist inhibitor
Lubricant LUB-112  Saponifier LUB-113
Product Features
Product Features
Product Features
Product Features
Product Features
This product is used for impregnation of castings, steel pipe fittings, finished materials, and the formation of a zinc-based phosphating film with a thickness of 7 - 10m. The film is black-gray, uniform and dense, and coarser phosphate crystal film. Adsorbs lubricants such as barium stearate. The liquid is characterized by stable bath, good quality, low dosage and low cost. 8 - 10m dark gray film, which can absorb lubricants such as stearic acid soap, so that the steel material can be smoothly drawn and drawn.
Industrially, sulfuric acid, hydrochloric acid or a mixed acid of sulfuric acid and hydrochloric acid is often used to remove scale and rust on the steel surface. During the descaling process, the acid reacts with the steel matrix and rust to generate hydrogen gas, which releases a large amount of acid mist. This not only pollutes the environment, corrodes equipment and plants, but also causes industrial conditions to deteriorate. In order to prevent the generation of acid mist, the addition of anti-fogging agent during the pickling process can reduce the generation of acid mist, prevent hydrogen embrittlement and prolong the service life of the acid solution; because of the surfactant, it can be cleaned against slight oil stains. Affect the rust removal effect.
This product is suitable for the scalding lubrication of lubricating metals in the pre-treatment of cold plastic processing, such as drawing steel pipes.
Can be continuously drawn multiple times, high lubrication performance, less residual ash after annealingNot flammable, not explosive, safe to use.
The solution is stable and easy to control and operate.

This product has good lubrication effect. Not flammable, not explosive, safe to use. The solution is stable and easy to control and operate.

Anti-aging, high grease, good lubrication

This product is aimed at the blackening of steel standard parts, electromechanical equipment, instrumentation and household appliances.

Good corrosion resistance. The surface of the workpiece is black and bright and used in combination with anti-rust oil or sealant.

Process parameters
The main purpose
Prepare 1 cubic
Prepare 1 cubic
Instructions
technical standard
Instructions
Scope of application
The main purpose
Packaging and storage
Packaging and storage
Packaging and storage
Packaging and storage
Packaging and storage
Temperature          65~80°C
Time                       5~12min
Total acidity           35~45
Free acidity            7~8
Prevents or reduces the reaction of acid and steel matrix and rust during derusting to produce a large amount of acid mist.
Contains surfactants and does not affect the rust removal effect. Prevent hydrogen embrittlement and prolong the service life of the acid.
Inject clean water into the treatment tank for about eight minutes.
After heating to 75 ° C, add 25-30 kg of LUS-122 lubricant and stir to dissolve.
Add water to the full amount of 1M3, and mix well.
Inject clean water into the treatment tank for about eight minutes.
After heating to 75 ° C, add 25 to 30 kg of LS-2 lubricant and stir to dissolve.
Add ° water to the full amount of 1M3, and mix well.
Each ton of metal material must be supplemented with about 1.5 kg of LS-2 lubricant.
Add 15~20% hydrochloric acid or hydrochloric acid and sulfuric acid mixed acid to 2~5% of the anti-fogging agent and mix well.
Exterior               Light yellow transparent liquid
proportion          1.15-1.16  
pH value             0.5-1
Temperature            75-85 C
Time                         5-2 min
It is used for phosphating lubrication of lubricating metals in pre-treatment of cold plastic processing, such as pulling steel wire, drawing stamping parts, cold rolling parts, etc.
Used for impregnation of castings, steel pipe fittings, and finished materials.
30Kg / barrel, can be specified packaging. It can be stored in a dry and cool environment for 1 year.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
25Kg / barrel, can be specified packaging. It can be stored in a dry and cool environment for 1 year.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
25KG / bag, can be specified packaging. It can be stored in a dry and cool environment for 1 year.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
25Kg / bag, can be specified packaging. It can be stored in a dry and cool environment for 1 year.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
25Kg / barrel, can be specified packaging. It can be stored in a dry and cool environment for 1 year.
The company has upgrade and improvement rights for all series of products independently developed and produced!
Including the appearance and packaging methods without prior notice, to produce and sell products mainly! Please understand and support!
友情链接:氧化整流器  
CSD
 
 
 Contact Details
consumer hotline:021-67247422
Mobile phone:18321084251
E-mail:360770108@qq.com